Filter
Top Products
12 Overview
Controls and Functions
Control Panel
1. STANDBY/ON (Refer to pages 18, 20 and 30 for
more information.)
Press this key for ONE second to turn the
projector on when it is in the standby mode. Or
press this key twice to turn the unit off.
POWER light
Indicates whether the unit is on or off
Q The orange light shows when the AC power
cord is plugged into the wall outlet (standby
mode). Once in the standby mode, you can
press the STANDBY/ON key on the projector
or the ON key on the remote control for ONE
second to turn the projector on.
Q The green light shows when the power is
turned on and the projector is operating.
Q Flashes orange for the first 60 seconds during
powering up, indicating that the lamp is
warming up.
Q Flashes orange for two minutes after the
projector is turned off to indicate that the lamp
is cooling.
4. ENTER (Refer to page 22 for more
information.)
Opens the selected item of the menu.
5. LAMP indicator light (Refer to page 30 for
more information.)
Indicates the status of lamp.
Shows a red light when the lamp has
developed a problem. Please contact your
BenQ dealer for assistance.
6. TEMPERATURE WARNING LIGHT
(TEMP) (Refer to page 30 for more
information.)
Lights if the projector’s temperature
becomes too high.
7. Zoom Ring (Refer to page 18 for more
information.)
Adjusts the size of the image
Q Rotate clockwise to enlarge the image or
rotate counter-clockwise to make the
image smaller.
2. MENU / EXIT (Refer to page 21 for more
information.)
Turns the on-screen display control menu on or
off. Exits and saves the menu settings.
8. Focus Ring (Refer to page 18 for more
information.)
Adjusts the focus of the projected image.
3ARROWS (c/e/d/f) (Refer to page 22 for
more information.)
Used to select the desired menu items and to
make adjustments.
1
2
3
4
5
6
8
7