Filter
Top Products
25 Menus
3. RGB&COMPONENT: The following settings are only available with a PC or Digital Television RGB signal:
■ AUTO: Adjusts the phase, frequency and position automatically.
■ FREQ.: Adjusts the frequency of the sampling clock that captures the input signal.
■ PHASE: Adjusts the phase of the clock.
■ H. POS.: Adjusts the horizontal position of the image.
■ V. POS.: Adjusts the vertical position of the image.
The available adjustment range of the vertical position depends on the type of the input signal that is being
displayed. The vertical position cannot be changed with some types of signal.
4. SAVE: There are three video memories in which users can store
settings, including all items in the Picture and Pro-Picture menus
except for SET COLOR TEMP.
■ To store the settings:
i.) Adjusts the items in the Picture and Pro-Picture menus to desired values
ii.) Go to the Display menu and select SAVE, press Enter. The SAVE OSD will be shown as the picture
above.
iii.) Select MEMORY 1, MEMORY 2 or MEMORY 3 and press ENTER to sore the settings.
iv.) To leave the OSD, press MENU.
5. LOAD: Loads the settings from one of three video memories.
ENVIRONMENT Menu
In this menu, global settings for the projector can be made.
There are four items available: DEFAULT — LAMP TIMER — AUTO OFF — LAMP HOURS.
1. DEFAULT: Loads the default value of the current input source.
2. LAMP TIMER: Resets the lamp timer. This should only be done after the lamp has been replaced.
3. AUTO OFF: Sets the auto-shutdown timer. The timer can be set to a value between10 minutes and 3 hours.
4. LAMP HOURS: This displays the number of hours the lamp has been used. (The lifetime of the lamp is
1500 hours.) If lamp usage exceeds 1000 hours, the Lamp indicator light blinks. When the lamp hours reach
1300, a warning message “Lamp!” displays on-screen. The Lamp indicator light keeps blinking. When the
lamp usage exceeds 1500, the projector will automatically shut down. When this happens, contact your
BenQ dealer for a new lamp.
Input source Number of available memories
VIDEO
S-VIDEO
COMPONENT 1, 2
DVI-ANALOG/ DIGITAL
3
3
3
3