Filter
Top Products
20 Basic Operation
Picture Quality Adjustment
Q When you press any of the picture qualty adjustment buttons, the selected
function is activated. Press e or f to adjust the values. The picture
quality adjustment can also be made in the PICTURE menu and the Pro-
PICTURE menu.
Q Refer to page 22 and page 27 for more information.
Tu r n i n g t h e Po w e r O f f
Follow the steps below.
1. Press the POWER ON/OFF key on the remote control or the
STANDBY/ON key on the projector. A message is displayed
on the screen:
“Do you want to turn off?
Yes --> Press POWER again!
No --> Press EXIT / MENU”
Press POWER ON/OFF or STANDBY/ON a second time to
turn the projector off.
2. The POWER light flashes orange and the fans run for two
minutes to cool the lamp. The projector will not respond to
any commands until cooling process is complete.
3. Then, the POWER light is a steady orange once the cooling process has finished. The fans will continue to
run for about one minute after the light changes to orange.
4. The fans stop and the light is orange.
5. If the projector will not be used for an extended period, turn the main power switch off and unplug the
power cord from the power outlet.