Filter
Top Products
19 Basic Operation
Selecting Aspect Ratio
Q Select an aspect ratio to suit the format of the video signal. There are five aspect
ratios available:
1. 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9
aspect ratio.
2. 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3
aspect ratio.
3. ZOOM: Enlarges an image with letterbox format to display it in full-screen
format with a 16:9 aspect ratio. The upper and lower portions of the image are
cropped. Use this setting for Cinemascope and Vista video wide screen formats.
4. DYNAMIC: A 4:3 aspect ratio image is enlarged NON-linearly in horizontal direction to accommodate
16:9 full-screen display.
5. REAL: One-to-one mapping is performed on the input signal without any scaling with the image
displayed at the center of the screen.
Q Refer to page 24 for information.
Selecting the Video Memory
Q Press the video memory key on the remote control to recall the settings directly.
Q There are three video settings : MEMORY 1, MEMORY 2 and MEMORY 3.
Q Refer to page 25 for more information.
Setting Menu
Q Press the MENU button to turn the on-screen display menu on or
off.
Q Use the ARROW buttons (c/e/d/f) to select items in the
menu or to make various adjustments.
Q Press the ENTER button to enter the setting for the current items
in the menu, or press EXIT to leave and save the settings for the
current items in the menu.
Q Refer to page 22 for more information.