Filter
Top Products
11
Important safety instructions
Controls and functions
Control panel
1. Focus ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the image.
3. Lens shift cover
4. Top IR remote sensor
5. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and
saves menu settings.
6. POWER
Toggles the projector between standby mode
and on.
7. Left/
Decreases the projector volume.
When the On-Screen Display (OSD) menu is
activated, the #7, #12, and #15 keys are used
as directional arrows to select the desired
menu items and to make adjustments.
8. ECO BLANK
Used to blank the screen picture.
9. POWER indicator light
Lights up or flashes when the projector is
under operation.
10.TEMPerature warning light
Lights up red if the projector's temperature
becomes too high.
11.LAMP indicator light
Indicates the status of the lamp. Lights up or
flashes when the lamp has developed a
problem.
12.Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images resulting
from an angled projection.
When the On-Screen Display (OSD) menu is
activated, the #7, #12, and #15 keys are used
as directional arrows to select the desired
menu items and to make adjustments.
13.AUTO
Automatically determines the best picture
timings for the displayed image.
14.MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
15. Right/
Increases the projector volume.
When the On-Screen Display (OSD) menu is
activated, the #7, #12, and #15 keys are used
as directional arrows to select the desired
menu items and to make adjustments.
16.SOURCE
Displays the source selection bar.
2
3
1
6
5
7
8
4
9
11
10
12
13
14
15
16
12