Filter
Top Products
56
Important safety instructions
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
14. After the start-up logo, press MENU/EXIT and then press / until the Advanced Setup menu
is highlighted.
15. Press to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page displays.
16. Highlight Reset Lamp Timer and press MODE/ENTER. A warning message displays asking if you
want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be
reset to "0".
11. Replace the lamp cover on the projector.
12. Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could result in
malfunction.
• Do not over tighten the screw.
13. Connect the power and restart the projector.
2
1