Filter
Top Products
34
Important safety instructions
1. In the Picture -- Basic > Advanced... menu, highlight Color
Management and press MODE/ENTER. The Color
Management page displays.
2. Highlight Primary Color and press / to select a color from
among Red, Green, Blue, Cyan, Magenta and Yellow.
3. Press to highlight Hue and press /
to select its range. Increase in
the range will include colors consisted of more proportions of its two
adjacent colors.
Please refer to the illustration to the right for how the colors relate
to each other. For example, if you select Red and set its range at 0,
only pure red is selected. Increasing its range will include both the red color close to yellow and red
color close to magenta.
4. Press to highlight Gain and adjust its values to your preference by pressing / . The contrast
level of the primary color you select will be affected. Every adjustment made will reflect to the image
immediately.
5. Press to highlight Saturation and adjust its values to your preference by pressing / . Every
adjustment made will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a
setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be
overpowering and unrealistic.
6. To leave and save the settings, press MENU/EXIT.
Setting Film Mode
Highlight Film Mode in the Display menu and select On by pressing / on the projector or remote
control.
This feature helps improve picture quality when projecting composite or S-video image from a film-
sourced DVD or Blu-ray Disc.
Setting 3D Comb Filter
Highlight 3D Comb Filter in the Display menu and select On by pressing / on the projector or
remote control.
This feature separates composite signal to Y (brightness) signal and C (color) signal, and can help produce
clearer and sharper images with correct colors in place.
This function is only available when a composite signal is selected.
Red
Yellow
Green
Cyan
Magenta
Blue