Filter
Top Products
41
Important safety instructions
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do
not affect the projection settings, operation, or performance.
• Menu Display Time in the System Setup > Menu Settings menu sets the length of time the
OSD will remain active after your last key press. Use / to select a suitable time length.
• Menu Position in the System Setup > Menu Settings menu sets the OSD position in five
locations. Use / to select a preferred position.
• Blank Reminder Message in the System Setup > Menu Settings menu displays a blank
reminder message while the projected image on the screen is hidden.
• Language in the System Setup menu sets your familiar language for the On-Screen (OSD) Menus.
See "Using the menus" on page 25 for details.
• Splash Screen in the System Setup menu sets a preferred logo screen to be displayed during
projector start-up.
Locking control keys
With the control keys on the remote control and projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example). When Key Lock is on, no control
keys on the remote control and projector will operate except POWER and .
To lock the keys:
1. Press MENU/EXIT and then press / until the Advanced Setup menu is highlighted.
2. Press to highlight Key Lock, and press / to select On. A warning message appears. Select Yes
and press MODE/ENTER. The control keys lock.
To unlock the keys, press and hold on the projector or remote control for 3 seconds.