Filter
Top Products
26
Important safety instructions
*Supported timing for 3D signal with Frame Packing format.
• Supported timing for PC input
Power indicator
Message and meaning
1080/60p 1920x1080 60 67.5 148.5
1080/24p* 1920x1080 24 27 74.25
Resolution Mode Refresh rate (Hz) H-frequency (kHz) Clock (MHz)
640 x 480
VGA_60 59.94 31.469 25.175
VGA_72 72.809 37.861 31.5
800 x 600
SVGA_60 60.317 37.879 40
SVGA_72 72.188 48.077 50
1024 x 768
XGA_60 60.004 48.363 65
XGA_70 70.069 56.476 75
1366 x 768 60 60 47.7 85.5
1280 x 768
1280 x
768_60
59.87 47.776 79.5
1280 x 1024 SXGA_60 60.02 63.981 108
1360 x 768
1360 x
768_60
60.015 47.712 85.5
Status LED
Step 1: Power On none
Step 2: Registration slow blinking
Step 3: Linking slow blinking
Step 4: Connected none
Step 5: Play Video solid
Message Meaning
Linking
If the wireless network between the projector and the HDMI device has
been established before, when power is on, this message appears to
notify that the network is making connection.
Wireless off Notifies wireless network failure after searching for three minutes.
Connecting to BenQ Tx Notifies a successful connection with the HDMI device.
Connected to BenQ Tx,
please check video source
Notifies no signal from the HDMI device.