Filter
Top Products
55
Important safety instructions
System Setup menu
Advanced Setup menu
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using the
menus" on page 31 for details.
Splash Screen
Allows you to select which logo screen will display during projector start-up.
You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 15 for details.
Auto Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Off" on page 59 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Blank Reminder Message
Sets whether the blank reminder message is displayed by the projector while
the image is hidden.
Input Source
Selects an input source to be projected. See "Selecting an input source" on
page 30 for details.
Source Rename
Renames the source to your desired name. See "Selecting an input source" on
page 30 for details.
Auto Source Search
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires a
signal. If the function is not activated, the projector selects the last used input
source.
Function Description
Lamp Settings
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 62 for details.
Equivalent Lamp Hour
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 59 for details.
HDMI Settings
HDMI Format
Selects an input source type for the HDMI signal. You can also manually select
the source type. The different source types carry different standards for the
brightness level.
HDMI Format is only available when the HDMI signal is selected.
CEC
Enables or disables the CEC function. When you connect an HDMI CEC-
compatible device to your projector with an HDMI cable, turning on the HDMI
CEC compatible device automatically turns on the projector, while turning off
the projector automatically turns off the HDMI CEC compatible device.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.