Filter
Top Products
43
Important safety instructions
image. Anamorphic is most suitable for images which are already in a 16:9 aspect, like high definition
TV, as it displays them without aspect alteration.
6. Letter Box: Scales a picture to fit the projector’s native resolution in
its horizontal width and resize the picture’s height to the 3/4 of the
projection width. This may produce a picture greater in height than
can be displayed, so part of the picture is lost (not displayed) along the
top and bottom edges of the projection. This is suitable for the display
of movies which are presented in letter box format (with black bars
on the top and bottom).
• The black portions are inactive areas and the white portions are active
areas.
• OSD menus can be displayed on those unused black areas.
Freezing the image
Press FREEZE on the remote control to freeze the image. The word "FREEZE" will display in the lower
right corner of the screen.
Even if an image is frozen on the screen, the pictures played are still running on the device where the
pictures are played. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen on the screen.
Using the test pattern
The projector is able to display the grid test pattern. It helps you adjust the image size and focus and
make certain that the projected image is free from distortion.
To display the test pattern, open the OSD menu and go to the Advanced Setup > Test Pattern and
press / to select On, or press TEST on the remote control.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys
for navigating the picture.
1. Press MENU/EXIT and then press / until the Display menu is highlighted.
2. Press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays.
3. Press repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press MODE/ENTER to switch to the panning mode and press the
directional arrows ( , , , ) on the projector or remote control to navigate the picture.
5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out function. You
can also press repeatedly until it is restored to the original size.
The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details.
16:9 picture
Letter Box
format picture