Filter
Top Products
48
Important safety instructions
Turning the projector off
To turn the projector off, press POWER on the projector or
on the remote control and a warning message appears. Press
the button again.
• The Power indicator light flashes orange and the fans run for
about two minutes to cool the lamp. The projector will not
respond to any commands until the cooling process is complete.
Once the cooling process finishes, a "Power Off Ring Tone"
will be heard.
To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 41 for details.
• Then, the Power indicator light is a steady orange once the cooling process has finished and fans stop.
• If the projector will not be used for an extended period, unplug the power cable from the power
outlet.
• To protect the lamp, the projector will not respond to any commands during the cooling process.
Actual lamp life may vary due to different environmental conditions and usage.