Filter
Top Products
57
Important safety instructions
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments
are not shown on the screen.
Function Description
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the Picture -- Basic > Preset Mode menu.
Resolution
Shows the native resolution of the input source.
Color System
Shows input system format: NTSC, PAL, SECAM, YUV, or RGB.
Equivalent Lamp
Hour
Shows the total lamp time used.
3D Format
Shows the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version
Shows the firmware version of your projector.