Filter
Top Products
57
string and a pre-defined algorithm in WEP64 or WEP128. You can input the same string in
both the AP and Client card settings to generate the same WEP keys. Please note that you
do not have to enter Key (1-4) as below when the Passphrase is enabled.
Key (1-4): Enter the key to encrypt wireless data. To allow encrypted data transmission,
the WEP Encryption Key values on all wireless stations must be the same as the router.
There are four keys for your selection. The input format is in HEX or ASCII style, 5 and 13
ASCII codes are required for WEP64 and WEP128 respectively no any separator is
included.
5.3.1.5 WPS
Billion WPS feature is follow Wi-Fi Alliance WPS standard and it ease set up of
security-enabled Wi-Fi networks in the home and small office environment. Reduces by half
the user steps to configure a network and supports two methods that are familiar to most
consumers to configure a network and enable security.
Set up of security-enabled Wi-Fi network
Step 1: Note down the AP’s PIN from Web (Ex: 78749887).
Step 2: Open wireless client’s WPS utility (Ex: Atheros Jumpstart WPS utility), select
“Configure a wireless network” and apply “next” button.