Filter
Top Products
79
Keep Alive: Set Enable to allow the router automatically reconnects the connection
when ISP disconnects it.
Connect to Demand: If you want to make UMTS/GPRS call only when there is a
packet requesting access to the Internet (i.e. when a program on your computer
attempts to access the Internet). In this mode, you must set Idle Timeout value at same
time. Enabling Connect on Demand will give you an option of Idle Timeout.
Idle Timeout: Auto-disconnect the connection when there is no activity on this call
for a predetermined period of time. The default value is 600 seconds, and Idle Timeout
not allow be set under 10 seconds.
Obtain DNS Automatically: Select this check box to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS
servers are passed to the DHCP clients along with the IP address and the subnet mask.
Note: If you don’t know how to set these values and please keep them untouched.
5.3.2.3 ADSL Mode
ADSL Mode: There are four modes “Open Annex Type and Follow DSLAM’s
Setting”, ”Annex A”, ”Annex L”, ”Annex M” and “Annex J” that user can select for this
connection.
Modulator: There are seven modes “AUTO”,”ADSL multimode”,”ADSL2”,”ADSL2+”,
“G.Lite:”, “T1.413” and “G.DMT” that user can select for this connection.