Filter
Top Products
85
If you wish to restart the router using the factory default settings (for example, after a
firmware upgrade or if you have saved an incorrect configuration), select Factory Default
Settings to reset to factory default settings.
You may also reset your router to factory settings by holding the small Reset pinhole button
more than 6 seconds on the back of your router.
Caution: After pressing the RESET button for more than 6 seconds and release it, the
system will be restarted with the factory setting.
5.3.3.5 User Management
In order to prevent unauthorized access to your router’s configuration interface, it requires
all users to login with a password. You can set up multiple user accounts, each with their
own password.
You are able to Edit existing users and Add new users who are able to access the device’s
configuration interface. Once you have clicked Edit on the account you want to edit, the
information of the account will be displayed above. Just go ahead and change the
password.
You can change the user’s password, whether their account is active and Valid. These
options are the same when creating a user account, with the exception that once created
you cannot change the username. You cannot delete the default admin account; however
you can delete any other created accounts by clicking ticking the box under Delete and
then press the Edit/Delete button.
You are strongly advised to change the password on the default “admin” account when you
receive your router, and any time you reset your configuration to Factory Defaults.