Filter
Top Products
Billion BiGuard VPN Client
Chapter 4: VPN Configuration
17
VPN Tunnel Configuration
How to create a VPN Tunnel?
To create a VPN tunnel from the main window (without using the Configuration Wizard), you
must follow the following steps:
1. Right-click on “Configuration’ in the tree list window and select “New Phase 1”
2. Configure Authentication Phase (Phase 1)
3. Right-click on the “new Phase 1” in the tree control and select “Add Phase 2”
4. Configure IPSec Phase (Phase 2)
5. Once the parameters are set, click on "Save & Apply" to take into account the new
configuration. That way the IKE service will run with the new parameters
6. Click on "Open Tunnel" for establishing the IPSec VPN tunnel (only in "IPSec Configuration"
window)
Please refer to Phase 1 and Phase 2 for settings descriptions.
Multiple Authentication or IPSec Configuration Phase
Several Authentication Phases can be configured. Therefore, one computer can establish IPSec
VPN connections with several gateways or other computers (peer to peer).
Similarly, several IPSec Configurations (Phase 2) can be created for a same Authentication