Filter
Top Products
Billion BiGuard VPN Client
Chapter 5: Troubleshooting
35
« no keystate » error
115305 Default sysdep_app_open: Init Connection for : Cnx-Cnx-P2 Cnx-remote-addr
115305 Default sysdep_app_open: IPV4_SUBNET Network 192.168.1.1
115305 Default sysdep_app_open: IPV4_SUBNET Netmask 255.255.255.0
115315 Default (SA Cnx-P1) SEND phase 1 Main Mode [SA][VID]
115317 Default (SA Cnx-P1) RECV phase 1 Main Mode [SA][VID]
115317 Default (SA Cnx-P1) SEND phase 1 Main Mode [KEY][NONCE]
115319 Default (SA Cnx-P1) RECV phase 1 Main Mode [KEY][NONCE]
115319 Default (SA Cnx-P1) SEND phase 1 Main Mode [ID][HASH][NOTIFY]
115319 Default ipsec_get_keystate: no keystate in ISAKMP SA 00B57C50
If you have an « no keystate » error, check if the preshared key is correct or if the local ID is
correct (see « Advanced » button). You should have more information in the remote endpoint
logs.
« received remote ID other than expected » error
120343 Default sysdep_app_open: Init Connection for : Cnx-Cnx-P2 Cnx-remote-addr
120343 Default sysdep_app_open: IPV4_SUBNET Network 192.168.1.1
120343 Default sysdep_app_open: IPV4_SUBNET Netmask 255.255.255.0
120348 Default (SA Cnx-P1) SEND phase 1 Main Mode
120349 Default (SA Cnx-P1) RECV phase 1 Main Mode
[SA][VID] [SA][VID]
120349 Default (SA Cnx-P1) SEND phase 1 Main Mode
120351 Default (SA Cnx-P1) RECV phase 1 Main Mode
120351 Default (SA Cnx-P1) SEND phase 1 Main Mode
120351 Default (SA Cnx-P1) RECV phase 1 Main Mode
[KEY][NONCE]
[KEY][NONCE]
[ID][HASH][NOTIFY]
[ID][HASH][NOTIFY]
120351 Default ike_phase_1_recv_ID: received remote ID other than expected
The " Remote ID " value (see " Advanced " Button) does not match what the remote endpoint is
expected.
« NO PROPOSAL CHOSEN » error
115905 Default sysdep_app_open: Init Connection for : Cnx-Cnx-P2 Cnx-remote-addr
115905 Default sysdep_app_open: IPV4_SUBNET Network 192.168.1.1
115905 Default sysdep_app_open: IPV4_SUBNET Netmask 255.255.255.0
115911 Default (SA Cnx-P1) SEND phase 1 Main Mode [SA][VID]
115913 Default (SA Cnx-P1) RECV phase 1 Main Mode [SA][VID]
115913 Default (SA Cnx-P1) SEND phase 1 Main Mode [KEY][NONCE]
115915 Default (SA Cnx-P1) RECV phase 1 Main Mode [KEY][NONCE]
115915 Default (SA Cnx-P1) SEND phase 1 Main Mode [ID][HASH][NOTIFY]
115915 Default (SA Cnx-P1) RECV phase 1 Main Mode [ID][HASH][NOTIFY]
115915 Default phase 1 done: initiator id c364cd70: 195.100.205.112, responder id
c364cd72: 195.100.205.114, src: 195.100.205.112 dst: 195.100.205.114
115915 Default (SA Cnx-Cnx-P2) SEND phase 2 Quick Mode [SA][KEY][ID][HASH][NONCE]
115915 Default RECV Informational [HASH][NOTIFY] with NO_PROPOSAL_CHOSEN error
115915 Default RECV Informational [HASH][DEL]
115915 Default Cnx-P1 deleted
If you have an « NO PROPOSAL CHOSEN » error, check that the « Phase 2 » encryption
algorithms are the same on each side of the VPN Tunnel.
Check « Phase 1 » algorithms if you have this: