Filter
Top Products
Rev. 2.01
- 46 -
SRP-350/352plusA&C
Screw
1
Heatsink Assy
2
1.Remove the screw.
2.Push the Heat-sink Assembly in
the direction of an arrow and
Separate it.
Screw (3x4)
4
Plate ground
2
Brkt TPH Rear
Heat Sink
6
Screw (3x4)
1
Spring TPH
5
Connector
7
3
1.Remove the screw.
2.Separate the Plate-ground and
BRKT TPH Rear.
3.Remover the two screws.
4.Separate the Heat-sink and the
Spring TPH.
5.Separate the Connector from the
Heat-sink.