Filter
Top Products
Rev. 2.01
- 55 -
SRP-350/352plusA&C
7-5 Auto Cutter and Drawer Problem
Auto Cutter
S
/
W Ok?
End
1. Check the Signal on CPU
2. Check the Harness
3. Check the Micro S/W in the Auto Cutter Assembl
y
Auto Cutter
Problem
N
Y
Auto Cutter
OK?
1. Check the Signal on CPU
2. Check the Output Signal of U13 (TA8428K)
3. Check the Harness
4. Check the Auto Cutter Assembly (Motor, Cutter...)
N
Y
Compulsory
Failure?
End
1. Check the Compulsory Harness & Connector
2. Check the Micro switch in the Drawer
Drawer
Problem
Y
N
Drawer Open
Failure?
1. Check the Drawer Connector & Harness
2. Check the Drawer Signals on CPU (P33, P34)
3. Check the related circuit & Component 2SD2170
(Q10, Q11)
4. Check the Solenoid in the Drawer
Y
N