Filter
Top Products
Rev. 2.01
- 8 -
SRP-350/352plusA&C
2-1-5 Wall Mount Installation
1. Remove the three screw from the bottom of
The Case lower. Separate the Case lower
From the Main body.
2. Attach the Plate-Spring to the right side of
Frame-body and tighten a screw as illustrated
.
3. After assembling the Case lower to set Body,
Turn the Set over and attach the BRKT Hanger
To the Case lower then tighten four screws.
4. Attach the BRKT Mount to the wall firmly
With the eight screws.