Filter
Top Products
35
CHAPTER 4: Configuration
If you want to remove the password after setting one, get into configuration
mode, type the letter “P”, and press the [Enter] key as before, but then press
[Enter] again without typing in any other characters. (If you try to lock the
Extender before you’ve set a password, or after you’ve removed the password, the
Extender will still blank the video, but it won’t prevent anyone from accessing the
CPU.)
4.5 Resetting the Extender to Its Factory-Default Configuration
If you want to set all of the ServSwitch Wizard Extender’s keyboard-controlled
configuration options back to their factory defaults, first go into configuration
mode, then issue the [F] [8] [Enter] command. (“[F] [8]” is the letter “F” followed
by the number “8”, not the [F8] function key.) This will also clear any password
you’ve set, but it will have no effect on the Extender’s video compensation, nor will
it change any settings controlled with the Extender’s DIP switches.