Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
112
Figure D-2. Dialup Connection (Cicso to Router).
To enable a Router to dial into a Cisco router, on the Cisco router:
1. Configure the physical line parameters, using the configure line command.
configure
line aux 0
login local
modem inout
speed 38400
flowcontrol hardware
This configures the AUX port to be in a mode capable of supporting a modem for incoming and/or
outgoing calls, with a port speed allowing modem compression. The highest speed supported is
38,400 bps.
The [configure line] command login local tells the Cisco router to use its own table of user names
and passwords to validate the login. Alternatively, you can have a password for each line (no user
name), or use a nearby TACACS server for validation.
2. Configure a username/password pair for logging in on the line:
[configure]
username xxxxx password yyyyy
Asynchronous
terminal
DCE
Cisco Router
Console
AUX
Modem
DTE
V.32bis or V.34
Async Router AR-P