Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
243
A.1.4 IPX GROUP
iface Dialing for: source_ipxaddr:socket dest_ipxaddr:socket
This is a routine notification that an IPX dialup connection is being initiated, with the source and
destination IPX addresses identified.
iface Answered call for: source_ipxaddr:socket dest_ipxaddr:socket
This is a routine notification that an IPX dialup connection was answered, with the source and
destination IPX addresses identified.
A.1.5 PAP G
ROUP
Callback not allowed
A non-Async-Client has attempted to call into the Router. However, the Router has been configured for
security callback. Security callback only works with Async Client clients. Priority: LOG_ERR.
iface failed to authenticate error_string.
The Router (at the other end of the PAP connection) is configured with an invalid user name. Correct
the remote user name and be sure the remote link password is also configured correctly. Priority:
LOG_ERR.
iface PAP peer says: message
The system at the other end of the PAP link has reported the connection message. The message can be
Welcome, in which case authentication is valid and the connection is good; or Invalid username or
password. If you must make username or password corrections in order to complete a connection.
Priority: LOG_INFO.
Invalid Authentication method
This error message indicates that a LAN-to-LAN dial-in connection has attempted to use PAP
authentication when the line has been configured for another form of authentication. Priority:
LOG_ERR.
Not allowed in at this time
A client has attempted to log in during a non-shift time, or the client account is disabled. Priority:
LOG_ERR.
A.1.6 RIP G
ROUP
RIP: received own update
Indicates that a network neighbor is misconfigured, so that it is returning the Router’s RIP updates
back onto the same network. No harm is done to the Router, but the errant remote RIP host should be
correctly configured. Priority: LOG_ERR.
A.1.7 S
ECURITY CALLBACK GROUP (SCHAP)
Not allowed in at this time
A client has attempted to log in during a non-shift time, or the client account is disabled. Priority:
LOG_ERR.
Failed to verify user_name
The user name presented by the client is not in the client account database. Priority: LOG_ERR.