Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
38
NOTE
For LAN-to-LAN operation, configure your local and remote NetWare LANs with unique
network numbers before configuring and operating the Router. This includes all
network numbers for all frame types. These numbers are set in the AUTOEXECNCF files
of your NetWare file servers, with the “BIND IPX TO lan_driver NET= net_number”
statements. Before proceeding with your Router software installation, make sure that
your local and remote IPX LANs have unique network numbers.
For User-to-LAN operation, each remote user (client) must also have a unique NetWare
network number. By default, the Router automatically assigns a unique network number
to each client. If you want the client to define the IPX network number used, set the IPX
network number of the Router’s modem to zero using the “ifconfig” command. If the
client and the Router have different assigned IPX network numbers, then the Router will
use the higher network number of the two.