Filter
Top Products
7
Preparing to Connect Your Equipment to the Projector
NOTE: Before you continue,
make sure the projector and your
equipment are turned off. If you’re
connecting a computer, make sure
the distance between it and the
projector is 10 feet or less.
Now you’re ready to connect your equipment. Computers are
connected to the CablePro. Video players and other equipment,
such as external speakers, are connected directly to the projector.
Steps for connecting the different types of equipment are given
on the pages listed below.
NOTE: In some older computers,
the monitor connector does not
have a hole for Pin 9. If you have
trouble connecting the CablePro
cable to your computer, contact
Boxlight Technical Support.
F
IGURE
5
Connector panel
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use Mac adaptors
(ordered separately).
Equipment you want to connect Page
Laptop computer with CablePro page 8
Desktop computer with CablePro page 10
Computer with VESA cable page 12
USB or PS/2 mouse page 8,
page 11
Video player page 13
External speaker page 15
CablePro
wired remote
external
speaker
s-video
composite
video
L/R audio in
(optional
accessory)
15 pin VESA
audio in
(for VESA input)