Filter
Top Products
31
Controls Menu Functions
F
IGURE
24
Controls menu
Video Standard
NOTE: If you already know the
video standard used in your geo-
graphical area, it’s often best to
manually select it.
When
Auto
is on, the projector attempts to pick the video stan-
dard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, or SECAM) auto-
matically based on the input signal it receives. (The video
standard options may vary depending on your region of the
world.) The input signals for SECAM, PAL-M, and PAL-N video
cannot be automatically detected, therefore they must be chosen
manually. If the projector is unable to detect the standard, the col-
ors might not look right or the image might appear “torn.” If this
happens, manually select a standard by clicking the button and
cycling through the standards.
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when you enter standby mode before
the projector turns off. Select among 1, 5, 10, and 15 minutes and
1 and 2 hours by clicking either mouse button and cycling
through the options.
Ceiling Projection
NOTE: To order the Ceiling
Mount, refer to “Optional Accesso-
ries” on page 50.
•
Click either mouse button to turn the image upside down for
ceiling-mounted projection.
Rear Projection
When you select
Rear Projection
, the projector reverses the image
so you can project from behind a translucent screen.