Filter
Top Products
33
4.1.1 Entrance and Exit Prompts
With ‘Ready’ displayed on the LCD, press the key to enter the Menu
Mode.
þ Note: While in the Menu Mode, the printer will stop processing new DPL
(or bitmapped) data.
MENU MODE Depending upon the configuration of the
printer, the following Entrance and Exit
Prompts may be displayed when accessing
or leaving the Menu System.
ENTER PASSWORD
0 0 0 0
You are attempting to enter the Menu Mode.
Security has been enabled and now the
correct user-definable password is required
for access the Menu Mode functions.
KEEP HOST CHANGES?
ENTER = YES
You are now entering the Menu Mode.
Existing Host commands have affected the
configuration of the printer. Pressing
ENTER will save these changes; otherwise,
the printer will revert to previously saved
settings.
SAVE CHANGES?
ENTER = YES
You are now exiting the Menu Mode, but
have made changes to the printer’s settings.
Pressing ENTER will reconfigure your
printer according to these changes;
otherwise, the printer will revert to
previously saved settings.
þ Note: If changes have been made that
require a reset, the printer will
automatically invoke that reset.