Filter
Top Products
38
Printer Options (continued)
CUTTER Used to cut media into separate labels. (The
physical presence of a cutter must be
detected to show the ENABLE/DISABLE
selections.)
ENABLED
Enables label cutting.
²DISABLED
Disables the cutter.
NOT INSTALLED
No cutter is detected.
GPIO PORT Model dependant option used to interface the
printer to an external controlling device (see
Appendix D).
GPIO
Input control signal is required to print a
label.
ENABLED
Enables external signal control.
²DISABLED
Disables the GPIO.
END OF PRINT
Programmable signal output.
ACTIVE LOW
ACTIVE HIGH
LOW PULSE
HIGH PULSE