Filter
Top Products
Name
MMCA_SET_ADC_RES_DISCR
Description The command sets the ADC resolution and the software discriminator range.
1. Parameter Channels integer value 128, 256, 512, 1024, 2048 or 4096
2. Parameter LLD integer value 0 <= LLD < ULD
3. Parameter ULD integer value LLD < ULD <(Channels-(Channels>>5))
Results -
Return Code see MMCA_RESET command
Name
MMCA_SET_ROI
Description The command sets the begin and end of the ROI for the preset integral and area.
1. Parameter ROI begin channel Integer value LLD <= begin < end
2. Parameter ROI end channel Integer value LLD < end <= ULD
Results -
Return Code see MMCA_RESET command
Name MMCA_SET_REPEAT
Description The command sets the number of sweeps for repetitive measurement.
1. Parameter Sweeps Integer value 0 ... 65535
Results -
Return Code see MMCA_RESET command
Name MMCA_SET_MCS_CHANNEL
Description The command sets the number of channels for the MCS and Rate mode.
1. Parameter MCS channels Integer value 0 (only for Rate mode), 128, ... 4096
Results -
Return Code see MMCA_RESET command
Name MMCA_SET_TIME_PER_CHANNEL
Description The command sets the dwell time per channel for the MCS mode.
1. Parameter Time
14
Integer value 1 ... 65535
Results -
Return Code see MMCA_RESET command
14 It is the real time per channel multiplied with 10 msec.
41