Filter
Top Products
MCA Mode Command:
Command name
CMD_SET_MODE
Description
Depending on the value of the first parameter (mod):
MODE_MCA = 0
MODE_MCS = 1
the command set MMCA to the required mode by activating the previous specified setup parameter.
The command will be ignored and responded with a error messages, if a measurement is still
running.
Command syntax
Format integer integer integer long integer
Parameter preamble command mod 0 end flag
Byte String (HEX) A5 5A 45 00 mod 00 00 00 00 00 B9 9B
Used setup value coarse_gain, fine_gain, mca_input_pol, mca_input_adc
Affected setup value mca_mode, stab_state
MCA state STATE_READY
MCA Clear Command:
Command name
CMD_CLEAR
Description
A running measurement is stopped immediately. Depending on the value of the first parameter
(clear):
CLEAR_MEMORY = 0
CLEAR_TIME = 1
CLEAR_ROI = 2
CLEAR_ALL = 3
the command clears the spectrum, the time information, the ROI limits exclusively or all together.
Command syntax
Format integer integer integer long integer
Parameter preamble command clear 0 end flag
Byte String (HEX) A5 5A 44 00 clear 00 00 00 00 00 B9 9B
Used setup value None
Affected setup value real time, dead time, ROI begin, ROI end
MCA state STATE_READY
59