Filter
Top Products
6.1 Improving Print Quality
6
CF2002/CF3102 6-1
Troubleshooting Chapter 6
6 Troubleshooting
6.1 Improving Print Quality
Symptom Cause Action
The image is too light. The setting in the printer driver
is not set properly.
Adjust the setting in the printer
driver to the desired level.
The paper loaded in the tray is
damp.
Replace the old paper with
fresh dry paper. p. 4-7
The toner will soon be empty. Replace the toner cartridge.
p. 5-5
The imaging unit may be
defective.
Contact your tecnical
representative.
The image transfer belt unit
may be defective.
Contact your tecnical
representative.
The image is too dark. The setting in the printer driver
is not set properly.
Adjust the setting in the printer
driver to the desired level.
The imaging unit requires
replacement.
Contact your tecnical
representative.
The image transfer belt unit
requires replacement.
The toner smudges. The image transfer roller unit
requires replacement.
Contact your technical
representative.
Partial void image The paper loaded in the tray is
damp.
Replace the old paper with
fresh dry paper. p. 4-7
The imaging unit requires
replacement.
Contact your technical
representative.
The image transfer belt unit
requires replacement.