Filter
Top Products
5.1 Message List
5
CF2002/CF3102 5-1
Printer Panel Messages Chapter 5
5 Printer Panel Messages
5.1 Message List
When a message appears in the printer panel display, refer to the section for details
about the message and the action to be taken.
✎
Note
The display window only displays two lines of a message at one time. To view
messages longer than two lines, press
Ä
to display the next line of the message.
Message Cause Action
Check power of DT unit Power is not being supplied to
the DT-105.
Check that power is supplied to
the DT-105.
Cover open at xx The indicated cover is open. Press
Ä
once, check which cover
is open, and then close it.
• front p. 3-5, #7
• right side p. 3-5, #1
• left side p. 3-5, #13
• fusing unit p. 3-6, #1
• 2nd feed p. 3-5, #5
• 3rd feed p. 3-8, #2
• 4th feed p. 3-8, #3
• LCC feed p. 3-9, #11
• duplex p. 3-8, #1
• horizontal transport p. 3-8,
#10, p. 3-9, #17
• finisher front p. 3-8, #5, p. 3-9,
#12
• finisher upper p. 3-8, #7,
p. 3-9, #15
• finisher tray 3 p. 3-9, #16
• finisher p. 3-8, p. 3-9
Correctly attach the finisher to
the printer.
Load xx
xx in xx
Paper of size xx and type xx is
not loaded in the specified tray.
Load paper of size xx and type xx
into the specified tray.
Load xx
in xx
xx-size paper is not loaded into
the specified tray.
Load xx-size paper into the
specified tray.
Load xx
OHP in tray1
xx-size overhead projector
transparencies is not loaded into
tray 1.
Load xx-size overhead projector
transparencies into tray 1.
Load xx
Thick 1 in tray1
xx-size thick paper 1 is not
loaded into tray 1.
Load xx-size thick paper 1 into
tray 1.