Filter
Top Products
3
3.1 Components and Their Functions
3-2 CF2002/CF3102
Before Making Prints Chapter 3
No. Part Name Description
7 Duplex Unit AD-14 (optional) Turns over prints, allowing double-sided prints to be made
automatically.
• If a printer controller (CN3102e) and the duplex unit are
installed on the printer, the memory must be expanded. If the
expanded memory is not installed, automatic double-sided
printing cannot be performed.
Referred to as the duplex unit throughout the manual
8 Paper Feed Unit
PF-118 (optional)
Equipped with a paper drawer that can supply 500 sheets of
paper; up to two paper feed units can be installed.
Referred to as the
paper feed unit
throughout the manual
9 Copy Table CT-2 (optional) A paper feed unit can be set up on the copy table, and then the
printer can be set up on the top.
By setting up the printer on the copy table, the printer can be
placed on the floor instead of on a desk, keeping the entire
surface of the desk free.
Referred to as the
copy table
throughout the manual
10 Finisher FN-8 (optional) Finishes prints according to the selected finishing mode
(sorting, stapling, hole-punching or binding), then feeds out the
pages
• The hole-punching function is only available if the optional
punch kit (PK-4) is installed onto finisher FN-8. If the finisher
is installed, the printer must be installed on the copy desk, on
the large capacity cabinet or over a paper feed unit combined
with the copy table.
10
7
8
9