BT 55 Fax Machine User Manual


 
PaperJet 55 user guide – Edition 3 – 10.10.01
To redial the last number
Press the Last Number button twice.
17
To dial using the handset
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Pick up the handset and listen via the
earpiece.
Use the keypad to dial the number you want.
If the other person’s fax machine is set up
for automatic reception, you hear the fax
tones, press the Start button and replace
the handset. Your fax is scanned and sent.
If your call is answered in person, ask them
to press the start button on their fax
machine. You will then hear their fax tones.
Press the Start button and replace the
handset. Your fax is scanned and sent.
When the fax has been sent, the display
shows
TX COMPLETED
to confirm a
successful transmission.
NOTE
To stop a fax being sent at any time, press the Stop
button.
Automatic re-dialling
If a fax fails to be sent, for example, the number
dialled was engaged, your PaperJet 55 will
automatically retry up to 3 times at 2 minute intervals.
If after all retries, the fax has not been sent, the
document will be deleted from memory (if using
MEMORY TX) or remain in the sheet feeder. You
have the option of retaining failed MEMORY TX
faxes in memory to enable you to try sending them
again without re-scanning. To do this you must enable
the document retransmission feature.
0
-
9
To switch document retransmission on/off
The default setting is off.
Press the Function button until display
shows
FAX SETUP
Press the Start button. Display shows
DATE AND TIME
Press the Function button. Display shows
VARIOUS SETTINGS
Press the Start button until display shows
RETRANS.DOC: OFF
Press the < > buttons to switch between
ON and OFF.
Press the Start button to confirm the option
displayed.
The machine returns to standby.
Volume
Start
Start
Last TX
Pause
F
Function
Start
F
Function
Start
Start
Stop