Filter
Top Products
NETWORK SCANNING (WINDOWS
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
12 - 8
Scan to File
When you select Scan to File you can scan a black and white or color
original and send it directly to a PC you designate on your network.
The file will be saved in the folder and file format that you have
configured in the Brother SmartUI on the designated PC. You can
change the
Scan
configuration.
(For Windows
®
98/Me/2000: See Scan to File on page 9-8 to 9-9.)
(For Windows
®
XP: See Hardware Section: Changing the Scan to
button configuration
on page 10-5 to 10-11.)
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press
Scan
.
3
Press or to select
Scan
to File
.
Press
Set
.
4
Press or to select a
destination you want to send.
Press
Set
.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press
Set
.
The DCP will start the scanning process.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the
Scan
button. You
will not be able to initiate a Network scan from the Brother
Control Center (SmartUI).
Max. 25 clients can be connected to one DCP on a Network. For
example, if 30 clients are connect at a time, 5 clients will not be
shown on the LCD.
▲
Scan to E-mail
Scan to Image
Scan to OCR
▼
Scan to File