Filter
Top Products
1 - 10 INTRODUCTION
Inserting originals for copying
(and scanning)
You can copy from either the ADF (automatic document feeder) or
from the scanner glass.
Using the ADF (automatic document feeder)
The automatic document feeder (ADF) can hold up to 50 pages,
feeding each one individually through the DCP. Use standard
(20 lb/75g/m
2
) paper when using the ADF. Always fan the pages well
and stagger them.
Temperature:68
°
F - 86
°
F (20
°
C - 30
°
C)
Humidity: 50% - 70%
Make sure originals written with ink are completely dry.
1
Pull out the ADF
document support
extension.
2
Unfold the ADF
document output support
flap.
3
Fan the pages well and
stagger them at an angle.
Make sure you put the
documents face up, top
edge first in the ADF
until you feel them touch the feed roller.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper
with staples paper clips, paste or tape attached. DO NOT use
cardboard, newspaper, or fabric. (To copy or scan this kind of
document, see Using the scanner glass on page 1-12.)
ADF Document
Support Extension
ADF
Document
Output
Support
Flap