Filter
Top Products
6 - 17 USING THE DCP AS A PRINTER
4
Enter your password using the
numeric keys.
Press
Set
.
5
Press or to select
Print
.
Press
Set
. The DCP prints the data.
—OR—
If you want to delete the secured data press or to
select
Delete
.
Press
Stop/Exit
.
Setting the Emulation Selection
This DCP has an Automatic Emulation Selection function. When the
DCP receives information from the PC, it automatically chooses the
emulation mode. This function has been set at the factory to AUTO.
You can change the default emulation mode manually by using the
control panel.
1
Press
Menu
,
3
,
1
.
2
Press or to select
Auto
,
HP LaserJet
or
BR-Script 3
.
Press
Set
.
3
Press
Stop/Exit
.
■
If you turn the power switch off, the secured data saved in
memory will be cleared.
■
After you print the secured data, it will be cleared from
memory.
■
Try this function with your application software or network
server. If the function does not work properly, either select
the required emulation mode manually using the DCP panel
buttons or use the emulation selection commands in your
software.
■
After you print the secured data it will be cleared from the
memory.
Secure Print
Test1
Password:XXXX
Enter & Set Key
31.Emulation
▲
Auto
HP LaserJet
▼
BS-Script 3
Select
▲▼
& Set