Filter
Top Products
59
TAB
LIMIT!
This message appears if the maxi-
mum number of tabs has already
been added to the text when you
hold down c and press Q.
Limit the number of tabs in the
text to 50.
TAPE
EMPTY!
This message appears if you try to
print a label or feed the tape when no
tape cassette is installed.
Install a tape cassette and try
again.
TEXT TOO
HIGH!
This message appears if the size of
the text is larger than the width of the
installed tape when the Length func-
tion is used.
Reduce the size of the characters
or install a wider tape.
TEXT TOO
LONG!
This message appears if the length of
the text is longer than the label length
that has been set using the Length
function.
Delete some of the text, reduce
the character width or increase
the set label length.
WRONG
ADAPTER!
This message appears if a high-volt-
age adaptor is being used.
Remove the high-voltage adap-
tor and connect the adaptor
designed exclusively for this
machine.
WRONG
CHAR!
This message appears if the cursor is
not below a number when you try to
use the Numbering function.
Move the cursor below a
number before trying to use the
Numbering function.
Error Message Cause Remedy