Brother MFC4800 All in One Printer User Manual


 
Troubleshooting and Maintenance 118
MAINTENANCE
NO RESPONSE/BUSY
The number you called does not
answer or is busy. Or, you may have
reached a number that is not
connected to a fax machine.
Check the number and try again.
NOT ASSIGNED
NOT REGISTERED
(for some countries)
You tried to access a One Touch or
Speed Dial number that is not
programmed.
Set up the One Touch or Speed
Dial number. (See Storing One
Touch Dial Numbers (For FAX-
2850 Only), page 14 and Storing
Speed Dial Numbers, page 15.)
OUT OF MEMORY
(When the machine is
used as a printer.)
The machine memory capacity has
been exceeded.
- If you have installed the
Windows
®
driver, try again
after setting the True Type
mode to Print as Graphics in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
PAPER JAM The recording paper is jammed in the
machine.
See Paper Jam, page 119.
PLS OPEN COVER A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Open the top cover. If you see any
jammed paper or other item, gently
pull it out, then close the top cover.
If the error message remains, open
and close the top cover again.
If the machine cannot reset itself
and return to the date and time
prompt, it will display MACHINE
ERROR XX. Please call your
Brother dealer for service.
TONER EMPTY Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge,
page 129.)
ERROR MESSAGE CAUSE ACTION