Filter
Top Products
4 - 5 GETTING STARTED
Setting the Phone Line Type
If you are connecting the MFC to a PBX or PABX, you need to
change the Phone Line Type to PBX by completing the following
steps.
1
Press
Menu
,
0
,
4
.
2
Press or to select
ISDN
,
PBX
(or
Normal
).
Press
Set
.
3
Press
Stop/Exit
.
PABX and TRANSFER
The MFC is initially set to be connected with PSTN (Public Switched
Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX).
Your MFC can be connected to most types of PABX. The MFC’s
recall feature supports timed break recall only (TBR). TBR will work
with most PABX systems, allowing you to gain access to an outside
line or transfer calls to another extension. The feature works when
the
Tel/R
key is pressed.
You can program a
Tel/R
key press as part of a number stored
in a One-Touch or Speed-Dial location. When programming the
One-Touch or Speed-Dial number (Function menu 2-3-1 or
2-3-2) press
Tel/R
first (the screen displays "!"), then enter the
telephone number. If you do this, you do not need to press
Tel/R
each time before you dial using a One-Touch or
Speed-Dial location. (See
Storing numbers for easy dialling
on
page 7-1.)
Initial Setup
4.Phone Line Set