Filter
Top Products
4 - 13 GETTING STARTED
Setting the Tray Use for Fax mode
If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of
Auto
allows your MFC to choose the
paper from the optional Tray #2 if Tray #1 is out of paper or if
incoming faxes will fit best on the paper in Tray #2.
1
Press
Menu
,
1
,
9
.
2
Press or to select
Tray#1
Only
,
Tray#2 Only
or
Auto
.
3
Press
Set
.
4
Press
Stop/Exit
.
Setting Tone or Pulse dialling mode
(Excluding the Nordic Countries)
Your MFC comes set for Tone dialling service (multi-frequency). If
you have Pulse dialling service (rotary), you need to change the
dialling mode.
1
Press
Menu
,
0
,
5
.
2
Press or to select
Pulse
(or
Tone
).
Press
Set
.
3
Press
Stop/Exit
.
If Auto Reduction is turned on, incoming faxes will be printed
from the tray that is set for Auto Reduction. (See Printing a
reduced incoming fax (Auto Reduction)
on page 5-6.)
General Setup
9.Tray Use:Fax
Initial Setup
5.Tone/Pulse