Brother DCP-375CW Printer User Manual


 
Chapter 4
24
Enlarging or reducing the
image copied 4
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
To enlarge or reduce the next copy follow the
instructions below:
a Load your document.
b Press Enlarge/Reduce.
c Do one of the following:
Press a or b to choose the
enlargement or reduction ratio you
want. Press OK.
Press a or b to choose
Custom(25-400%). Press OK.
Press a or b repeatedly to enter an
enlargement or reduction ratio from
25% to 400%. Press OK.
d Press Mono Start or Colour Start.
Note
Page Layout Options are not available
with Enlarge/Reduce.
Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
Press
Fit to Page
Custom(25-400%)
198% 10x15cmiA4
186%10x15cmiLTR
142% A5iA4
100%
97% LTRiA4
93% A4iLTR
83%
69% A4iA5
47% A4i10x15cm