Filter
Top Products
Confidential
5-38
5.1.16 Pickup Roller Holder ASSY
(1) Turn the printer upside down.
(2) Remove the six bind B M4x12 taptite screws, and then remove the chute base.
NOTE: When re-assembling the chute base, check that the bind B M4x12 taptite screws (A)
and (B) shown in the figure above are secured correctly.
FG harness ASSY 5
Taptite, bind B M4x12
Taptite, bind B M4x12 (B)
Taptite, bind B M4x12
Chute base
Printer top side
(Printer body upside down)
Taptite, bind B M4x12 (A)