Brother FAX-202 Fax Machine User Manual


 
SETUP RECEIVE
5 - 4
Setting F/T Ring Time
You need to determine how long the fax machine will notify you with its special F/T
pseudo-ring when you have a voice call. It will ring happens after the initial ringing
from the phone company. Only the fax machine rings for 20, 30, 40 or 70 seconds; no
other phones on the same line ring the special F/T pseudo-ring. However, you can
answer the call on any phone (in a separate wall jack) on the same line as the fax
machine.
1
Press Function/Set, 2, 2.
2
Press or to select how long the fax machine
will ring to alert you that you have a voice call and
press Function/Set.
3
Press Stop to exit.
Now, when a call comes in and the machine is set to FAX/TEL Mode, all phones on
this line will ring the number of times you selected in Ring Delay.
You can let the fax machine pick up and detect if it’s a fax or voice call. If it’s a fax
call, the machine prints the fax. If it’s a voice call, the machine signals you with a
F/T pseudo-ring for the length of time you selected in F/T Ring Time.
Record FAX/TEL Outgoing Announcement (F/T OGM)
(For FAX-333MC only)
This is the announcement played by your fax machine (not an external TAD) when
someone calls and your machine is set to FAX/TEL mode. Although callers hear your
announcement, they cannot leave a message. To erase the announcement, follow the
directions on Activating Message Center Mode, page 9-3.
1
Press Function/Set, 8, 3. The screen prompts you to choose F/T OGM, MSG CTR
OGM or PAGING MSG.
2
Press or to select F/T OGM (not MSG CTR OGM) and press Function/Set.
3
Press or to select RECORD OGM? and press Function/Set.
Then pick up the handset to record a message.
4
Replace the handset. Your OGM is played.
5
Press Stop to exit.
Even if the caller hangs up during the F/T pseudo-ring, the fax machine continues for
the set time.
RING TIME:20 SEC