Filter
Top Products
9 - 12
MESSAGE CENTER (FOR FAX-333MC ONLY)
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a remote fax
machine.
1
Dial your fax number.
2
When you hear the beep, immediately enter your Remote Retrieval Access Code
(1 5 9 ).
3
When you hear two short beeps, use the dial pad to press 9 5 4.
4
Enter the new number of the remote fax machine where you want your fax messages
forwarded, then press # #.
5
To retrieve the Memory Status List, when you hear two short beeps, use the dial pad
to press 9 6 1.
6
Use the dial pad to enter the number of the remote fax machine (up to 20 digits), then
press # #.
7
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. The remote fax machine prints the
Memory Status List showing the new forwarding number.
8
Check the forwarding number.
If the forwarding number is not correct, return to Step 1 to reset it.
You can not use or # as dial numbers. However, if you want to store a pause, press
#.