Brother FAX-4100 Fax Machine User Manual


 
13 - 12
TROUBLESHOOTING AND ROUTINE MAINTENANCE
DIFFICULTY SUGGESTIONS
Copy Quality Difficulties
Vertical streaks appear
in copies.
Sometimes you may see vertical streaks on your
copies. Either the scanner or the primary corona
wire for printing is dirty. Clean them both.
(See pages 13-18 to 13-20)
Print Quality Difficulties
Printouts are too dark or
too light.
Adjust the print conditions by setting the Print Density
setting. It has been factory set to the middle position.
(See
Setting the Print Density, page 5-4.)
Printed pages contain
white stripes.
White Stripes or
Faint lmages
You may fix this by wiping the scanner windows
with a clean soft cloth. (See
Cleaning the Document
Scanner
, page 13-18 and Replacing the Drum Unit,
page 13-23.) If you still see white stripes or faint
images and the LCD shows CHANGE DRUM
SOON, replace the drum unit with a new one.
Check the machines environment. Conditions
such as humidity and high temperatures may cause
this print defect to occur.
Printed pages are
stained with toner or
have vertical
stripes.
Dark Stripes or
Toner Stains
Clean the machines interior and the primary
corona wire of the toner cartridge. (
See
Routine
Maintenance
, page 13-18 and Cleaning the Drum
Unit,
page 13-19.) Make sure that the tab of the
corona wire is at the home position. If after
cleaning, you still see dark stripes or toner stains
and the LCD shows CHANGE DRUM SOON,
replace the drum unit with a new one.
Printed pages have
white in black text and
graphic areas.
White Spots
Make sure that you use paper that meets the
specifications. Rough surface or thick media can
cause the problem. If you still see white spots and
the LCD shows CHANGE DRUM SOON,
replace the drum unit with a new one.
Check the machines environment; conditions such
as high humidity may cause this situation to occur.