Filter
Top Products
4 - 6
INITIAL SETUP
Setting the Handset Volume
1
Press Menu, 1, 4, 4.
2
Press or to select your setting
(LOW or HIGH), and then press Set.
The default setting is LOW.
3
Press Stop/Exit.
—OR—
Any time you are talking on the telephone, you can adjust the handset volume
by pressing the volume High or Low keys on the control panel. The LCD shows
the setting you are choosing.
The new setting will remain until you change it again.
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use the machine, you must decide if you need to set the
handset volume to AMPLIFY:ON for a user who is hearing-impaired. The
AMPLIFY:ON volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press Volume High or Low on the control
panel to adjust the volume to LOW or HIGH. When the handset is replaced, the
handset volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume High or Low on the control panel to
adjust the volume to LOW, HIGH or AMPLIFY. When the handset is
replaced, the handset volume returns to the default setting of LOW.
VOLUME AMPLIFY:ON—PERMANENT
Choose VOL AMPLIFY:ON—PERMANENT if all of the users are hearing-
impaired. During a conversation, users can press Volume High or Low on the
control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY.
WARNING
It is important that you do not choose PERMANENT unless all the users
are hearing-impaired. Otherwise, the default setting of AMPLIFY may
damage the hearing of some users.
When you press Volume High or Low on the control panel to adjust the
volume, the display shows the setting you are choosing. Each key press changes
the volume to the next setting.
4.HANDSET