Filter
Top Products
Remote Fax Options
8 - 3
Setting Fax Storage
If you select Fax Storage, your fax machine stores the received fax
in the memory. You will be able to retrieve fax messages from
another location using the Remote Retrieval commands.
1
Press Menu/Set, 8, 1.
2
Press ▲ or ▼ to select
FAX STORAGE.
Press Menu/Set.
3
Press Stop/Exit.
Turning off Remote Fax Options
If you set the FWD/PAGE/STORE to OFF and there are faxes in your
fax machine’s memory, the LCD will give you two options.
■ If you press 1, all unprinted faxes will be printed and erased
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
■ If you press 2, the memory will not be erased and the setting will
be unchanged.
Setting your remote access code
The remote access code lets you access the Remote Retrieval
features when you are away from the fax machine. Before you use
the remote access and retrieval features, you have to set up your
own code. The default code is inactive code (--- ).
1
Press Menu/Set, 8, 2.
2
Enter a three-digit code using
numbers 0-9.
Press Menu/Set. (The “ ” cannot be changed.)
3
Press Stop/Exit.
If you have set Fax Storage, a backup copy will automatically
be printed at the fax machine.
Do not use the same code which is set in your Fax Receive
Code( 51) or Telephone Answer Code (#51).
(See Operation from extension telephones on page 5-5.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press Stop/Exit in
Step 2 to restore the inactive setting (--- ).
1.FWD/PAGE/STORE
2.REMOTE ACCESS