Brother FAX 2840 Fax Machine User Manual


 
Chapter 2
20
Handling and using special
paper 2
The machine is designed to work well with
most types of xerographic and bond paper.
However, some paper variables may have an
effect on print quality or handling reliability.
Always test samples of paper before
purchasing to ensure desirable performance.
Store paper in its original packaging and keep
it sealed. Keep the paper flat and away from
moisture, direct sunlight and heat.
Some important guidelines when selecting
paper are:
DO NOT use inkjet paper because it may
cause a paper jam or damage your
machine.
Preprinted paper must use ink that can
withstand the temperature of the
machine’s fusing process of 392 degrees
Fahrenheit (200 degrees centigrade).
If you use bond paper, paper that has a
rough surface or paper that is wrinkled or
creased, the paper may exhibit degraded
performance.
Types of paper to avoid 2
Important
Some types of paper may not perform well
or may cause damage to your machine.
DO NOT use paper:
that is highly textured
that is extremely smooth or shiny
that is curled or warped
1 A curl of 2 mm or greater may cause
jams to occur.
that is coated or has a chemical finish
that is damaged, creased or folded
that exceeds the recommended weight
specification in this guide
with tabs and staples
with letterheads using low temperature
dyes or thermography
that is multipart or carbonless
that is designed for inkjet printing
If you use any of the types of paper listed
above, they may damage your machine.
This damage may not be covered under
any Brother warranty or service
agreement.
1
1